Solid Billet Milled Pin Fin Heat Sink and Aluminum Heat Sink with Multiple Surface Finishing and Tight Tolerance Control
Multiple Surface Finishing Pin Fin Heat Sink
,Tight Tolerance Control Aluminum Heat Sink
,Solid Billet Milling Pin Fin Heat Sink
Custom CNC Milled 6061 Aluminum Pin Fin Heat Sink for Semiconductor and Power Electronic Equipment
This pin-fin cooling component is milled from a monolithic aluminum billet rather than assembled from separate parts. The integrated pin-fin construction eliminates assembly gaps and effectively lowers thermal resistance. Custom pockets and threaded mounting bosses are machined on the reverse side to fit customer-specific housing structures. Strict in-house inspection procedures carry out flatness testing and dimension sampling prior to shipment. Pin height, pin density, and surface finish can all be adjusted according to the thermal requirements defined in your submitted drawings.
| Processing Type | CNC Milling, Deburring, Edge Polishing |
|---|---|
| Available Material | Aluminum 6061, 6063, 7075 |
| Tolerance | ±0.03 mm |
| Surface Finish | As-machined, Sandblasting, Clear / Black Anodizing |
| Drawing Format | 2D PDF / CAD, 3D STEP / IGES |
| Application Scenario | Semiconductor Test Device, High-power Converter |
| Inspection Method | Height Gauge, CMM Sampling Check |
| Production Range | Prototype, Small Batch, Mass Production |
- One-piece solid billet milling without assembly gaps
- Dense cylindrical pin array maximizes heat exchange area
- Reverse-side customized pockets and threaded mounting bosses
- Tightly controlled base flatness for reliable heat-source contact
- Adjustable pin geometry matched to thermal design requirements
The pin-fin structure dissipates continuous operating heat for high-power test modules and stabilizes instrument running status.
Works as a thermal control component for power conversion hardware. The solid aluminum base maintains low thermal resistance under long-duration load.
Q1: Can pin height and pin spacing be adjusted?
A1: Yes. Pin diameter, height, and array layout can be adjusted according to your thermal simulation data.
Q2: Which surface option improves radiative heat dissipation?
A2: Black anodizing can enhance radiative heat dissipation upon request. Clear anodizing is widely used for anti-corrosion purposes.
Q3: Do you accept short-lead prototype orders?
A3: Prototype sampling is supported. Submit drawing files for lead-time evaluation.
Q4: What maximum dimension can be processed?
A4: Maximum processing length reaches 800 mm. Submit drawings for a detailed manufacturability review.
Q5: Will you provide DFM suggestions before production?
A5: DFM feedback, including manufacturability risk points, will be delivered after drawing review.
-
CVery impressed with the precision of this billet turbo rotor. No tool marks on the flow path. Raw aluminum finish is exactly what we need for our in-house heat treatment and coating process.
-
SKlarer Kaufgrund: Preis-Leistung stimmt. Kleiner Hinweis: Die englische Produktbeschreibung ist knapp, aber die technische Zeichnung auf Anfrage war vollständig. Gerne wieder.
-
EProbably an unusual use case: I needed a modern, clean-looking bearing housing for a rotating art piece going into a lobby installation. Most off-the-shelf bearing blocks are cast iron or painted steel and look clunky. This aluminum post with the triangular flange and brushed finish fits the aesthetic I wanted. Machining quality held up, no visible tool marks, edges clean. The artist client didn't even realize it was a "made for machines" part.
Send your inquiry directly to us