Hollow Shaft Harmonic Gearbox HST-20-80-III Through Hole Cable Routing Reducer CRAl0034
Hollow Shaft Harmonic Gearbox
,Through Hole Cable Routing Reducer
,HST-20-80-III Harmonic Reducer
What the Through Bore Changes
- Cleaner cable routingContinuous rotation of the joint no longer twists the harness, so cable life extends and the joint can be designed without an external cable carrier.
- Shorter axial stackBecause nothing wraps around the outside, the joint housing shrinks and the arm gets compact at the wrist - exactly where space is scarce.
- Faster assemblyTechnicians feed the harness through the bore before mounting the reducer, which removes the tightest step in joint assembly.
- Direct shaft pass-throughA driving shaft can run through the bore for stacked axes, enabling two joints to share one mechanical centreline.
Hollow Shaft Specification
| Model | HST-20-80-III |
|---|---|
| Part Number | CRAl0034 |
| Output Form | Hollow shaft with central through hole |
| Reduction Ratio | 80:1 |
| Backlash | Zero backlash |
| Main Material | Alloy steel / spring steel, heat treated |
| Surface Treatment | Blackening, passivation, optional hard anodizing |
| Tolerance Grade | Micron-level precision |
| Bore Function | Cable, air tube and drive shaft pass through |
Integration Notes
Mount the reducer directly on the servo flange and route the motor and encoder leads through the bore before tightening the output flange bolts. Keep a service loop on the far side of the joint, not around the housing. For stacked wrist axes, a single through shaft can carry motion from the second motor, which shortens the arm and reduces reflected inertia.
Applications
Collaborative robot wrists and elbows, humanoid shoulder and hip modules, robotic grippers and end effectors, AGV and AMR steering modules, rotary tables where slip rings are undesirable, and medical or optical instruments that need a clean cable path through the rotation centre.
-
TWe ordered this custom stainless steel large transmission gear disc for our industrial conveyor drive system. The tooth profile and runout tolerance are perfectly controlled, no backlash issue after installation. Great 5-axis machining work, stainless finish is clean and corrosion-resistant
-
RWe ordered custom turbo impellers for our performance turbocharger kits. 5-axis CNC work is outstanding, every blade profile matches the 3D model. Raw aluminum finish gives us flexibility for our own surface treatment. Tolerances are tight, no rework required. Trustworthy precision parts supplier.
-
MFor a shop that goes through a few of these a quarter, the savings add up. Reordering now.
Send your inquiry directly to us