HST-20-80-III Zero Backlash Harmonic Drive Reducer Hollow Shaft Robot Gearbox CRAl0034
Harmonic Drive Reducer Hollow Shaft
,Zero Backlash Robot Gearbox
,HST-20-80-III Harmonic Reducer
Where Backlash Costs You Money
In a robot joint every arc-minute of lost motion becomes a repeatability error at the tool tip. An 80:1 harmonic reducer with 3 arc-min backlash on a 300 mm arm already drifts roughly 0.26 mm after each direction reversal. The HST-20-80-III removes that drift at the source: zero backlash output, micron-level transmission error, and torsional stiffness high enough that the servo loop stays stable without aggressive gain tuning.
Accuracy Related Features
- Zero backlash output stage - matched flexspline and circular spline pairs keep hysteresis out of the loop, so bi-directional positioning stays symmetrical.
- Micron-level tooth accuracy - ground tooth flanks hold transmission error inside a narrow band across the full rotation.
- High torsional stiffness - short load path through the hollow shaft body resists wind-up under acceleration.
- Reversible, low-friction drive - back-driving torque stays predictable, which helps gravity-compensation on vertical axes.
- Stable after thermal cycling - alloy steel and spring steel combination is heat treated as a matched set, so accuracy does not drift after warm-up.
Accuracy Specification
| Model | HST-20-80-III |
|---|---|
| Part Number | CRAl0034 |
| Reduction Ratio | 80:1 |
| Transmission Type | Harmonic gear drive, strain wave principle |
| Backlash | Zero backlash (below measurement resolution) |
| Transmission Error | Micron-level, verified on gear measuring centre |
| Output Form | Hollow through-hole shaft |
| Main Material | Alloy steel / spring steel |
| Surface Treatment | Blackening, passivation, optional hard anodizing |
| Inspection | 100% dimension report, optional CMM report |
Typical Installation
Collaborative robot joints, humanoid elbow and wrist axes, robotic end effectors, rotary positioning tables for inspection, semiconductor wafer handling arms, and optical gimbal drives. The reducer suits direct servo mounting; a hollow bore lets encoder and motor cables route straight through the joint instead of wrapping around the housing.
Sample orders from 1 pcs, prototype lead time 3-5 working days, drawing review and tolerance consultation included.
-
MThis custom CNC aluminum alloy large diameter flange disc rotary plate has excellent flatness and runout control. Bolt holes align perfectly, no wobble during high-speed rotation. Great for our test platform assembly.
-
SKlarer Kaufgrund: Preis-Leistung stimmt. Kleiner Hinweis: Die englische Produktbeschreibung ist knapp, aber die technische Zeichnung auf Anfrage war vollständig. Gerne wieder.
-
HThey proactively and responsibly discuss and resolve any issues that arise during production; they are highly responsible and a trustworthy manufacturer.
Send your inquiry directly to us