300-800mm Outer Diameter Faced Both Sides 6061-T6 Aluminum Flange Disc Blank and Semi-Finished Flange Plate for Prototype Builds
aluminum flange disc blank
,semi finished rotary plate
,prototype aluminum disc stock
A machined aluminum flange disc supplied as a semi-finished blank: faces turned flat, outer diameter finished, bore pre-machined, and dowel holes left for the customer's final operation. It suits engineering teams that want to hold the critical bore and hole pattern in-house while outsourcing the heavy material removal and facing work. Blanks are available in popular diameters so a prototype can be built without waiting for full custom machining.
- You send the final drawing with the bore and hole pattern defined.
- We machine the blank with 0.3–0.5 mm stock left on the bore and hole positions.
- Your team finishes the bore and dowel holes, or returns the blank to us for the finishing pass.
| Outer Diameter | Thickness | Bore Pre-Hole |
|---|---|---|
| 300 mm | 12 / 16 / 20 mm | 20 mm |
| 400 mm | 16 / 20 / 25 mm | 25 mm |
| 500 mm | 20 / 25 / 30 mm | 30 mm |
| 600 mm | 20 / 25 / 30 mm | 30 mm |
| 800 mm | 25 / 30 / 40 mm | 40 mm |
- Outer diameter turned to final size with 0.02 mm tolerance
- Both faces faced flat and parallel
- Bore pre-drilled and bored, stock left for final reaming
- Edges deburred, surfaces protected with peel film
Single pieces are accepted so a design can be validated before tooling is committed. For projects moving from prototype to production, the blank drawing is kept on file and repeat orders are produced on the same fixture, so the second batch matches the first.
Blanks are cut from 6061-T6 plate by default and can be supplied in 7075 for higher strength needs. Surface treatment is normally left off so the customer can anodize after final machining and avoid coating build-up in the bore.
Yes, single piece orders are accepted for prototype work, with the same tolerance as batch orders.
Typically 0.3–0.5 mm on bores and hole positions, adjustable to suit your finishing process.
Solid blanks without a pre-bore are available if your process starts from a drilled hole.
-
TWe ordered this custom stainless steel large transmission gear disc for our industrial conveyor drive system. The tooth profile and runout tolerance are perfectly controlled, no backlash issue after installation. Great 5-axis machining work, stainless finish is clean and corrosion-resistant
-
MFor a shop that goes through a few of these a quarter, the savings add up. Reordering now.
-
HThey proactively and responsibly discuss and resolve any issues that arise during production; they are highly responsible and a trustworthy manufacturer.
Send your inquiry directly to us