Hard Anodized Wear Resistant Aluminum Rotary Disc 60mm Thick Flange Plate for Robotic Base
thick aluminum rotary disc
,wear resistant flange plate
,robot base mounting disc
A thick-section aluminum flange disc built for welding positioners, robot bases, and other stations where the plate carries an offset load. Material thickness starts at 30 mm and reaches 80 mm, and all load-bearing faces receive hard anodizing to resist abrasion from clamps and fixtures. Ribs and gusset bosses can be milled into the back face to raise stiffness without adding a separate support plate.
- Thick plate core – 30 mm to 80 mm section keeps deflection low under cantilever loads.
- Back face ribbing – milled ribs increase bending stiffness with limited weight penalty.
- Reinforced bore boss – local thickening around the bore spreads bolt preload and protects the bearing seat.
- Lifting points – threaded holes for eye bolts can be added for handling discs above 60 kg.
Hard anodizing at 30–50 µm is applied to the working face, while the bore and mounting faces stay masked to hold tolerance. Where the disc contacts steel clamps, a thicker coating or a replaceable steel wear ring can be designed in.
| Parameter | Range |
|---|---|
| Material | 6061-T651 thick plate |
| Outer diameter | 300 mm – 1000 mm |
| Thickness | 30 mm – 80 mm |
| T-slot or bolt pattern | Custom, radial or grid |
| Coating | Hard anodized 30–50 µm |
| Max part weight | Up to 400 kg |
Thick discs are machined in two operations with an intermediate stress relief, then finished on a large swing lathe. Deep pockets are milled with trochoidal paths to keep heat low and avoid distortion at the rim.
Welding positioners, robot seventh-axis bases, heavy inspection rotators, press tooling plates, and fixture bases for construction equipment assembly.
Standard lead time is 15–20 working days for a first article and 20–30 days for repeat batches, depending on diameter and pocket complexity. Machining drawings are confirmed before material is cut.
Yes. T-slots, grid hole patterns, and radial slot arrays are all machined to your drawing, with slot depth checked against the remaining wall thickness.
The coating resists spatter adhesion, but heavy spatter should still be cleaned regularly. Local masking is possible where electrical grounding is needed.
It is fixed to a plywood skid with steel banding and lifting points clearly marked, and can be shipped by sea or air depending on schedule.
-
MThis custom CNC aluminum alloy large diameter flange disc rotary plate has excellent flatness and runout control. Bolt holes align perfectly, no wobble during high-speed rotation. Great for our test platform assembly.
-
RWe ordered custom turbo impellers for our performance turbocharger kits. 5-axis CNC work is outstanding, every blade profile matches the 3D model. Raw aluminum finish gives us flexibility for our own surface treatment. Tolerances are tight, no rework required. Trustworthy precision parts supplier.
-
HThey proactively and responsibly discuss and resolve any issues that arise during production; they are highly responsible and a trustworthy manufacturer.
Send your inquiry directly to us