CNC Machined Aluminum Flange Plate with Dowel Hole Layout and Flatness 0.01mm for Optical Test Platform
precision aluminum flange plate
,optical test platform plate
,0.01mm flatness disc
A precision machined aluminum flange plate produced for metrology and optical test platforms. The design focus is on face flatness, bore-to-outer-diameter concentricity, and an accurate dowel hole layout, so the plate can locate a fixture or lens mount repeatedly without adjustment. Faces are fine turned and, where specified, surface ground to reach a flatness of 0.01 mm.
| Feature | Capability |
|---|---|
| Face flatness (ground) | 0.01 mm |
| Face flatness (turned) | 0.02 mm |
| Parallelism between faces | 0.015 mm |
| Bore to OD concentricity | 0.01 mm |
| Dowel hole position | ±0.01 mm |
| Surface roughness | Ra 0.8 µm on locating faces |
Dowel holes are reamed to H7 and positioned from a single datum, with counterbores, clearance holes, and threaded inserts drilled in the same set-up. Patterns can be polar, rectangular, or mixed, and a dedicated gauge pin set can be supplied for incoming inspection.
- Plate stock is stress relieved before finish machining to limit movement after thinning.
- Finish cuts are light and taken symmetrically from both faces.
- Locating faces are machined last, after all holes, to keep them free of burrs.
- Parts rest on three-point supports during inspection to avoid measuring distortion.
A dimensional report listing flatness, parallelism, concentricity, and hole coordinates can be issued with the shipment. First article inspection is available for new drawings, including a marked-up drawing with measured values.
Optical breadboards and lens mounts, granite stage adapters, laser alignment fixtures, vision system calibration plates, and semiconductor test nests.
| Parameter | Value |
|---|---|
| Material | 6061 or 7075 aluminum |
| Outer diameter | 100 mm – 800 mm |
| Thickness | 6 mm – 30 mm |
| Finish | Bare, chem film, black anodized with masked bores |
| Cleaning | Ultrasonic clean and individual bagging |
Yes. Surface grinding is offered for plates where 0.01 mm flatness or Ra 0.8 µm is required.
Anodizing adds roughly half the coating thickness per surface, so bores that must stay on size are masked before treatment.
Gauge pin sets matched to the dowel holes can be supplied as an accessory for incoming inspection.
-
TWe ordered this custom stainless steel large transmission gear disc for our industrial conveyor drive system. The tooth profile and runout tolerance are perfectly controlled, no backlash issue after installation. Great 5-axis machining work, stainless finish is clean and corrosion-resistant
-
MFor a shop that goes through a few of these a quarter, the savings add up. Reordering now.
-
HThey proactively and responsibly discuss and resolve any issues that arise during production; they are highly responsible and a trustworthy manufacturer.
Send your inquiry directly to us