7075 Billet Aluminum Rotary Plate Hard Anodized Indexing Disc 12mm Thick for High Speed Turntable
7075 billet rotary plate
,hard anodized indexing disc
,balanced aluminum turntable plate
This rotary plate is cut from 7075 aluminum billet and hard anodized on all machined faces. It is intended for indexing turntables that run at higher speed or carry optical tooling, where a stiffer plate keeps the load centred and reduces vibration. The blank is roughed, stress relieved, then finished in a second clamping so the plate stays flat after anodizing.
- 7075 billet alloy – noticeably higher yield strength than 6061, so a thinner plate can carry the same load.
- Hard anodized skin – 25–40 µm coating on faces and bore for abrasion resistance on sliding contact areas.
- Dyed and sealed finish – black or natural, sealed after anodizing to limit staining from coolant and handling.
- Balanced mass distribution – symmetric pocket layout keeps the centre of gravity on the rotation axis.
After machining, the plate is checked on a balancing stand and, if required, correction holes are added at the rim. Bore run-out is held within 0.02 mm and face run-out within 0.03 mm, which is normally sufficient for indexing stations running at several hundred rpm.
| Item | Specification |
|---|---|
| Material | 7075-T651 aluminum billet |
| Outer diameter | 150 mm – 900 mm |
| Thickness | 8 mm – 40 mm |
| Bore | H7 reamed, keyway optional |
| Face treatment | Hard anodized 25–40 µm, sealed |
| Run-out | Bore 0.02 mm, face 0.03 mm |
| Balancing | Optional correction drilling |
Hard anodizing is standard for this configuration. Sandblasting before anodizing gives a matte appearance, while a masked finish keeps the bore and locating faces bare for precise fit. Chem film is available when electrical conductivity must be preserved.
High speed indexing turntables, laser marking stations, optical inspection rotators, wafer handling platforms and precision measurement fixtures.
Send the 2D drawing with bore, bolt circle and pocket dimensions plus the required surface treatment. A DFM note is returned within two working days, then a sample is machined before batch release.
Yes, although the coating looks slightly darker than on 6061. Hard anodizing on 7075 gives good wear resistance and is commonly used for rotating plates.
Static balancing is included on request. Dynamic balancing at a specified rpm can be arranged with a third-party laboratory.
Because 7075 is stronger, thickness can often be reduced. Share the load and speed data and we will propose a workable section.
-
CVery impressed with the precision of this billet turbo rotor. No tool marks on the flow path. Raw aluminum finish is exactly what we need for our in-house heat treatment and coating process.
-
TWe ordered this custom stainless steel large transmission gear disc for our industrial conveyor drive system. The tooth profile and runout tolerance are perfectly controlled, no backlash issue after installation. Great 5-axis machining work, stainless finish is clean and corrosion-resistant
-
SKlarer Kaufgrund: Preis-Leistung stimmt. Kleiner Hinweis: Die englische Produktbeschreibung ist knapp, aber die technische Zeichnung auf Anfrage war vollständig. Gerne wieder.
Send your inquiry directly to us