Custom Aluminum 5-Axis CNC Milled Mounting Hub Bracket for Automation Equipment
Custom Mounting Hub Bracket
,Aluminum Mounting Bracket
,5-Axis CNC Milled Hub Bracket
This custom aluminum mounting hub bracket is manufactured by 5-axis CNC milling. It features an integrated flange base, side cutout windows, and precisely tapped threaded holes. The part achieves tight geometric tolerances and a uniform matte surface finish, making it widely used for automation equipment connection and mounting support. We support custom dimensions, material options, and surface treatments according to your CAD drawings.
- 5-axis CNC machining completes multiple complex features in one setup, ensuring concentricity and positional accuracy.
- Multiple threaded holes and mounting cutouts are pre-machined for direct assembly.
- Aluminum alloy material offers lightweight construction with good rigidity and corrosion resistance.
- Matte brushed surface finish with no burrs and consistent appearance.
- Available for both prototype and batch production.
| Item | Details |
|---|---|
| Material | Aluminum Alloy 6061 / 7075 (Optional) |
| Machining Type | 5-Axis CNC Milling |
| Tolerance | ±0.02 mm |
| Surface Finish | Matte Brushed |
| Thread Specification | Custom tapped holes as per drawing |
| Application | Automation equipment, robotic mounting frame |
| Minimum Order | 1 piece for prototype |
Yes. All dimensions, hole layout, and cutout shapes can be fully customized based on your 2D/3D drawings.
We commonly use 6061 and 7075 aluminum alloy. 7075 offers higher strength, while 6061 has better machinability and anodizing effect.
We support clear anodizing, black anodizing, hard anodizing, sandblasting, and passivation.
-
JExcellent custom stainless steel housing with brushed surface. We use it for industrial sensor electronics. The sealing groove and mating surface are tightly controlled for IP protection. Their engineering team checked our drawing and avoided machining risks. The batch consistency is reliable. Great 5-axis machining capability on hard stainless steel.
-
DThe one-piece machined bracket fits our motion module perfectly. No distortion after anodizing. Sample lead time was shorter than we expected. We will launch mass production order soon.
-
EThe custom dense‑fin aluminum heat sinks work well on our new‑energy control modules. Fin deformation rate is very low after CNC milling. Thermal performance matches our lab test expectation.
Send your inquiry directly to us